Where Can I Buy Garage Door Struts

Share This Post

Quality Residential And Commercial Garage Door Installations And Products

Best DIY Garage Door Strut for Homeowners, Property Managers, & Prosumers.

Markham Garage Doors provides the largest selection of residential and commercial garage door products and accessories throughout the Markham area. Our team of friendly and experienced garage experts provides individualized attention to all of our local customers recommending the highest-quality products from leading manufacturers like Clopay® and LiftMaster and finding unique solutions that suit your specific needs, improve your daily conveniences and fit your budget.

Reinforcing An Existing Door

If you already have a door installed there are steps you can take to reinforce your existing door. The top section of your garage door is under the most stress since it likely has an automatic opener attached to its center stile pulling and pushing during door operation. The bottom section is also under a lot of stress since the torsion spring system tension is being directed through the bottom corner brackets. The bottom section also sits closest to the ground and makes hard contact with the ground if manually operated.

During my time as a service coordinator at least 75% of damaged panel house calls involved the top section. Due to the high percentage all top sections on garage doors should have horizontal and vertical reinforcement.

  • Opener Reinforcement Bracket

Reinforce Your Garage Door In 3 Easy Steps

All garage doors should be reinforced with an opener attachment mounting bracket and horizontal cross braces called struts. These parts help prevent overhead door panels from bowing, cracking and splitting.

My first home purchase included a garage door that was so flimsy it seemed like a strong gust of wind would blow it right onto my car at any moment. Seeing this clunker of a garage door popping in action forced me to think of ways I could reinforce the door, saving myself a trip to the auto body shop. Fortunately for me I ended up taking a job in the door business soon after and received some great advice. In this post I will share with you the reasons garage doors need reinforcement, how to reinforce the door and why it makes economic sense to take preventative measures.

Also Check: How To Change Garage Keypad Code

Serving Markham And The Surrounding Areas

Markham Garage Doors is the premier expert in residential and commercial garage door installation, repair and maintenance for homeowners throughout , Ontario, and the surrounding communities including the Aurora, Newmarket and Richmond Hill areas. Learn more about our garage door services by visiting our Markham showroom, speaking to one of our team members at 905-472-9178, or completing our online contact form.

Frequently Asked Questions About Garage Door Repair Services

Ideal Door® 2

Garage doors sensors do go bad. Because garage doorâs sensors are located near the ground, they can sometimes become obscured by dirt, dust, and debris. If youâre experiencing problems with your garage door sensors, first sure the sensors are clean, and also make sure there are no obstructions, such as rocks and branches. If your garage door goes up but you have trouble getting it to go down, check that the sensors are aligned. Thereâs a little light on each sensor that should be lit up when nothing is placed between the two sensors. After youâve checked that the sensors are properly aligned, simply tightening the brackets may solve a misalignment issue. If a sensor has no light, it may have gone bad and will need repair or replacement.

There are tests you perform to make sure garage door sensors are operating efficiently. If you are unsure about how to proceed, itâs wise to call in a garage door repair specialist to troubleshoot the problem for you. Itâs important that your sensors are working properly, because not only do facilitate easy garage door opening and closing, they also protect people, kids, and pets from a moving door hazard.

If youâve checked the sensors, and your door still wonât stay down, itâs wise to call in a pro. A garage door repair specialist will be able to do an on-site assessment of your situation and offer a safe and effective solution.

Also Check: 1 2 Hp Garage Door Opener

Why Choose Cedar Park Overhead Doors For Your Garage Door Parts

You can fix it today. We have most parts in stock and we sell them a reasonable prices.

Custom springs? We can make them today, while you wait.

A company you can trust with a Strong Local 30 year old company standing behind the products we sell.

Better Business Bureau A+ Rating for the Last 15 yearsWe are active and accredited members of the Better Business Bureau. Click on the link to the left to see our record.

Insured work at very fair prices. If our work is not up to your expectations, we will come back and make you happy. Guaranteed.

Fast service. Our technicians carry many garage door springs on their trucks and can fix most problems with a single visit on the same day you called.

Eliminate Popping Noises With Reinforcement Struts

Older garage doors may have sections that are prone to sagging, warping and bending. When a wide door sags in the middle the tongue and groove joints of each section may not line up correctly, causing the tongue to rub against the groove as the door is moving. This usually results in a popping noise as the joint pops into place. Many homeowners report popping noises as the door moves around the curved track radius although it can happen at any point during operation. Adding a horizontal support strut will help prevent the door from sagging in the middle and allow the joints to line up correctly during operation.

If your garage door is already bent, cracked or split horizontal bracing is a temporary solution. Bracing can be added to the damaged area to keep the panel from separating. However, the damaged section will need to eventually be replaced. Much like an aluminum soda can being bent back and forth the garage door section will eventually split and break in half. This can cause damage two other sections of the garage door or personal property in the garage. Punched angle can be added in the area where the door is split or cracked. This will serve as a temporary fix until the section can be properly replaced.

Recommended Reading: Garage Door Repair League City

A Few Points To Keep In Mind When Considering Garage Door Parts And Fixing It Yourself

Safety Your garage door can weigh from 90 to 800 pounds. It is raised and lowered with springs and those springs have enough force to lift an 800 pound door. This is a lot of force and can hurt or kill you. If you are going to work on your own door, then you need to be careful. Never loosen any bolts on a garage door that are that you do not understand, especially those that are painted RED. This is some manufacturers way of identifying danger areas. There are many dangerous areas and they are all over the door and the spring line, and they are not all painted red. If you dont know what it is, do not remove the bolt!

Correct Parts If you cant be stopped and want to do it yourself. Please BRING THE OLD PART and a picture of your door. We can match it up and make sure you are not making several trips for the right part. It is rare that I do a job around the house without at least one trip to Lowes or Home Depot to find the right part that I missed.

Wide Body Reinforcement Bracket

How to Install Garage Door Struts

For doors requiring a more heavy duty option, wide body adjustable brackets are suitable. These brackets are also 12 gauge zinc plated steel and can handle the stress of heavy wood and commercial size doors. The main advantage of this design is a built in #1 center hinge. The center hinge is attached to the bracket straight from the factory crating a seamless solution. This eliminates the need for install your existing hinge over the top of the bracket. It also provides a cleaner looking and stronger designed option. Wide body adjustable brackets can be installed on any garage door although installing them on a light weight door is overkill. You will also need to pay attention to the width of your center stile. The wide body bracket could overlap your center stile if it is under 3 wide. In the event you have a unique door design with an obstruction in the way of the full hinge reinforcement bracket hinge, a half hinge option is available. This design also has a built in hinge, but only has half of the center hinge.

  • Wide Fixed Height Brackets
  • Wide Adjustable Full Hinge

Recommended Reading: How To Repair Garage Door Opener

Why We Need Garage Door Reinforcement Struts

Have you ever looked at the inside of your garage door, and all the various parts that make it work? If you have a double door, at least 16-feet wide, youll generally see a steel bar on the inside of the door. This bar is U-shaped, and attached via hinges. And its like this for an important reason. This is the reinforcement strut bar, and it is a very important part of a safe garage door system.

Installing Opener Reinforcement Brackets

  • Figure out what type of opener bracket you need narrow or wide? Zinc plated or white? Adjustable brackets are highly recommended.
  • Close your garage door and unplug your garage door opener.
  • Disconnect your operator J arm from the opener bracket by removing the pin.
  • Remove the existing bracket, center hinge and strut
  • Measure your top section height & put together the opener bracket to match using bolts, screws, and clevis cotter pins supplied.
  • Fasten the opener bracket to the center stile with at least 4 self drilling TEK screws.
  • Reinstall the center hinge over the bottom of the opener bracket.
  • Reinstall any struts or punch angle over the opener bracket using the existing screws.
  • Connect the opener J arm to the cotter pin and secure the clevis pin.
  • Plug in and run your garage door opener.
  • Also Check: Apartments With Attached Garages Fort Worth

    When To Repair A Garage Door

    If your door is new or its in new condition, then it would be nice if you arrange a service for your door. With the passage of time, the cracks would appear indoors as because it is common in a garage door. For this case, your garage door professionals can easily fix these issues and it would not charge you a lot. The professional will fix your sagging door buy fixing struts and adjusting torsion springs.

    In other cases there are 2 new struts which are most important to fix the sagging issue in doors.

    Sagging Garage Door,

    A sagging garage door is a drag, and once your door starts to dip, you typically have two options. Attempt to repair the sag , or replace the door in its perfectly.

    Narrow Adjustable Reinforcement Bracket

    Superstrut 1

    The most economical way to reinforce your garage door for the use of an automatic opener is with the narrow adjustable opener mounting bracket. Its sleek professional design is strong enough for all residential and light duty doors. The zinc plated finish helps it blend in with the center stile it attaches to. In the event you have a double sided steel garage door with white interior, a white powder coated finish is available. The bracket has a 12 gauge thickness and comes with 4 adjustable settings accommodating doors from 18-24 in height. This particular bracket doesnt come with a built-in hinge so both your top strut and #1 hinge will need to be fastened. The narrow adjustable bracket is the the best choice for residential garage doors.

    Don’t Miss: Air Conditioner For The Garage

    The Best Markham Residential Garage Door Services

    At Markham Garage Doors, our team is dedicated to always providing Markham homeowners with attractive and dependable garage door products. All of our Clopay garage doors are crafted from the finest quality steel, aluminum and wood available, and extensively tested against the harshest climates to ensure lasting durability and beautiful appearances. Our residential garage door products are safe, easily maintained and energy-efficient.

    Along with quality construction, these doors are designed to feature todays latest visual aesthetics, including a variety of colour and stain options, hardware and window texture options.

    For every new garage door installation, well also help maximize your doors performance and efficiency with a state-of-the-art LiftMaster garage door opener. We stock the latest opener models featuring the most advanced upgrades available today, including Wi-Fi connectivity and MyQ, Security+ 2.0 with rolling door codes, timer-to-close and battery backup.

    Two Main Functions Of Reinforcement

    Reinforcement struts have two main functions: They support the garage door when it is open. They reinforce the door at all times against inclement weather, particularly important if you live in an area where there are strong winds or threats of hurricanes.Most reinforcement struts that youll see on populous garage doors are inches wide. These are held in place with hinges or steel clips while these are very strong hinges or clips, its important to understand that you should never attempt to use reinforcement strut bars as a ratio toreach anything stored in the feild above the diazepam online eu garage door. Children should also be discouraged from doing this, especially if the garage door is moving. This could cause serious injury.

    Also Check: Garage Organization For Garden Tools

    Top Panel Garage Door Opener Bracket Reinforcement

    The first step in reinforcing your garage door is to install a garage door opener reinforcement bracket. Obviously if you plan on manually raising your door by hand without the use of an automatic opener you will not need this bracket. Most garage door openers include a small opener bracket that anchors to the top panel center style. Unfortunately, this bracket does not evenly distribute the force of the opener pulling the garage door. This creates a situation where excess tension can rip the center style off of your garage door, damaging the top section especially during winter months when ice can freeze the bottom section to the floor.

    An OEM adjustable operator reinforcement bracket can be installed on the top panel of your door to prevent the center style from separating from the base of the door panel. The bracket is installed the full length of the center style of your garage door to distribute the opener tension equally across the full height of the door stile. Opener brackets come in a variety of styles, colors and sizes to fit all types of doors. The opener bracket shown in the picture is a universal narrow adjustable bracket that can be adjusted to door sections measuring 18 24 in height. It also has a narrow low profile design to blend in with the garage door stiles it anchors to. For these reasons I believe it is the best option for all residential garage door opener reinforcement.

    • Narrow Adjustable Zinc Plated

    How Many Struts Should Be Installed

    4 Garage Door Dangers Every Diy’er Must Know! Watching This Video Could Keep You Safe!

    Horizontal struts can be installed on every section of the garage door. Some doors have a strut installed on the top and bottom of each panel. This is common in coastal areas where garage doors must be wind code rated due to tropical storms with winds exceeding 100 miles per hour. If you decide to add additional struts to an existing door it is important to remember that you may need to adjust the spring tension or replace the springs entirely. Adding more than 10 lbs of weight to your door usually requires additional tension to be added to your torsion springs and if you have to add more than a full turn of tension to the torsion springs it is probably best to completely replace them with a properly calibrated set. Adding excess tension to your springs will cause them to wear out much faster!

    Getting your door reinforced during the purchasing process is MUCH easier than retrofitting a door already installed. If you suspect your garage door will take on a lot of abuse get it reinforced correctly before purchase. Reinforcing a door with an opener bracket and horizontal struts can cost 3x more if not done during the initial purchase. Special applications require a higher reinforcement package. Here are a few applications that come to mind:

    • Pole Barns Experiencing High Winds

    You May Like: Garage Door Strut Home Depot

    Should I Install A Strut Or Replace My Garage Door Section

    A garage door strut is a metal piece designed to provide horizontal strength and rigidity to a garage door panel. Many doors come standard with a strut across the top panel of the garage door. This strut when across the top section helps to support the door during opening and closing using a electric garage door opener.

    Many times we go out on calls because a garage door is sagging or bent. This can be caused by many things including hitting the garage door with your car. In some cases we can install a strut to straighten and support the damaged garage door section. With the strut installed properly the garage door will function smoothly without any sagging or binding.

    If the panel is severely damaged or has tears in the steel, many times it is better to replace the garage door section if manufacturer and model numbers can be determined, and the section is still available. There are usually stickers on the sides of the garage door that list manufacturer and model number. If these stickers are not available, it can be difficult to identify manufacturer and model number. Sometimes garage door service companies can identify the manufacturer and model number even if the stickers are not available.

    If you are adding a strut it is important to check the garage door balance. Adding a strut to a garage door is adding weight to a garage door, with the added weight you may need to adjust or replace the spring to accommodate for the added weight.

    For example:

    Related Posts