Spring On Garage Door Broken

Share This Post

Unroll The Unbroken Spring

How to Fix Broken Spring on Garage Door

Push the second winding bar into space only at the 9:00 spot. Remove the bottom bar and wind the spring down slowly, outdoing the winding bars as you go. Remove the nuts and bolts that connect the center bracket to the stationary spring cones. After that, you can slide the springs down to the bottom levels.

Is Your Garage Door Spring Broken This Is How To Fix It

A garage door weighs tans, and it would be close to impossible to move it, shut and open without the help of the door springs. The stretching and contracting of the door spring on the garage door balance out the heavyweight of the garage door to help it slide up and down easily during opening and closing. So, now I am not strong enough to lift that door to open its been the springs all this time.

Garage springs, just like any other mechanical device, are prone to breakages. Youll need to know what to do when this happens, but well get to learn how to fix your broken garage door springs later on. For now, its essential to know how and what may break your garage door springs to make sure that they give you your moneys worth.

What Happens When A Garage Door Spring Breaks

When a garage door spring breaks, you can tell by the following signs:

  • The door is harder to open or becomes crooked as it moves up and down.
  • The door wont stay up by itself.
  • The pulley and safety cables may become loose and hangs down.
  • The spring unwinds letting out a loud noise
  • The door is suddenly very heavy and may bend at the top if forced open.
  • The door may not open or makes jerky movements while operating the opener.
  • The garage door may slam down forcefully.
  • The spring has a gap of a few inches where it broke.
  • The manual emergency rope no longer works.
  • The door goes up but a safety lock prevents the door from going down.

Don’t Miss: Garage Door Repair Lexington Sc

For Help Replacing Your Springs Contact A Pro

Schedule an inspection or replacement service with a trusted garage door company.

For service from the friendliest garage door experts in Texas, contact our team at Doorvana. We build, service, and install garage doors in the Dallas-Fort Worth metroplex. We invite you to learn more about our company, services, and products by exploring our website. If youre ready to talk shop, give us a call at or send us a message.

Removing The Old Springs

Garage Door Repair Services in Omaha, NE and Council Bluff, IA ...
  • 1Unplug the garage door opener and clamp the door to the track. Disconnect the garage door opener so the door remains closed. Use locking pliers or a C-clamp to secure the door to the track to keep it from opening when you release the tension on the springs.XResearch source
  • 2Loosen the set screws while holding each spring with a winding bar. Position a sturdy ladder to the side of the springs, rather than working directly in front of them, for safety reasons. Put on eye protection and leather gloves. Push a winding bar into the bottom hole of the winding cone on the outside of 1 spring. Use a wrench to loosen the 2 set screws. Keep a firm grip on the bar as the the spring will expand powerfully as the screws are released. Repeat on the other side.XResearch source
  • If you dont have winding bars, you can make your own. Purchase 2 pieces of 18 in long metal bar stock with a 12 inch diameter. To ensure the bars fit securely into the winding cone holes, file down the ends.
  • Using a screwdriver, pin punch, or plier handles to unwind the bars could result in serious injury, as these tools arent designed to hold the spring in place.
  • Avoid standing on a bucket or chair to reach the springs. Use a sturdy ladder to minimize the risk of injury.
  • 4Remove the nuts and bolts, then slide the springs to the end bracket. Using a wrench, remove the 2 nuts and bolts that secure each spring cone to the center bracket. Then, slide each spring toward the end bracket.XResearch source
  • Read Also: Garage With Lift For Rent

    If Your Car Is Trapped

    If a spring or cable breaks while your cars are parked inside, the garage door won’t open and you’ll be stranded. Getting emergency evening or weekend service from a garage door professional can easily cost $400. However, if you can get your vehicles out of the garage, you can postpone the repair to get normal weekday repair rates.

    If you want to do the repair yourself, get several phone estimates first, because rates vary widely among service companies. Most garage doors are heavy , so call in three strong friends to help you lift the door and hold it open while you lock it in the full raised position with a locking pliers. Then move your vehicles and have your friends help you lower the door.

    Opening And Closing Issues

    If you notice that your garage door has stopped whilst opening and/or closing, has jerky movements, or is closing too fast, then it could mean that the springs are worn down, broken or damaged. To ensure safety, never manually force your garage door shut or open. Also, be very careful if your garage door is closing too fast this could be indicative of a completely broken spring, and doors experiencing these issues are dangerous to handle. Give Doormatic a call and we will send out one of our friendly technicians to help solve the issue right away.

    Recommended Reading: How To Program Garage Door Key Pad

    Broken Garage Door Springs

    Many people use their garage door more often than their front door. As the main entry and exit point of your home, your garage door goes up and down several times a day. Even so, its only natural for you to neglect its importance in your daily life.

    However, what happens if one morning, you cant open your garage door? Youre late for work and you cant back your car out. What are you supposed to do about this? You might wonder, Can I replace the spring on my garage door?

    Signs Of A Damaged Garage Door Spring

    Broken Spring on Garage Door Repair // Plus Installing Safety Cables

    If your door isnt opening correctly, spend a few minutes inspecting it to see if you can figure out the problem. Sometimes, your spring may be damaged or worn out, but it wont be broken. Other times, there will be a distinct break. Either way, it doesnt take a rocket scientist to discover a problem with your garage door spring. Typically, there are two ways to identify damaged or worn-out springs:

    Read Also: Garage Door Wall Button Flashing

    Measure Your Torsion Spring

    To properly replace your garage door spring, youll need to find the new dimensions . This should take no more than 3 minutes, and you wont need to disconnect the springs or release the stress to do so. You dont have to get it to an acceptable accuracy because the springs are designed to be a little adjustable.

    Its Difficult To Get It Right

    Because a broken or malfunctioning spring is a safety hazard, theres no room for error. If you dont install it right, someone could get hurt, or you could end up damaging your garage door. Saving money is never worth the risk of hurting yourself or someone you love. If you suspect you have a damaged or broken garage spring, its time to call the experts.

    Providing quality service and repair in the Charlotte, N.C. area, RCS Carolinas is home to a team of experienced, well-trained professionals who are ready and able to diagnose problems with garage doors of all kinds both residential and commercial.

    While we are confident we can repair your garage door and have it working like new, if you decide its time to replace your existing one, RCS Carolinas can help with that, too. Offering a variety of Clopay garage doors, our showroom has many great options if youre in the market for a well-designed, high-quality garage door.

    Let us get your garage door working again. Give RCS a call and schedule your service visit today!

    Don’t Miss: Best Garage Door Weather Stripping

    How Much Does Spring Repair Cost

    The most common question we get over the phone is, “Okay, so how much does it cost to replace garage door springs?” To give you an exact price quote, we would need to know the size of the door, weight, and type of garage door springs needed .

    Since we carry over 30 different types of springs to account for all the different types of garage doors, we recommend that a professionally trained technician takes the proper measurements himself before giving you an exact price quote. Call Precision today to have a professionally trained technician give you an estimate on garage door spring repair!

    Is It Safe To Open A Garage Door With A Broken Spring

    Signs It

    As professionals in the industry, we advise you do not attempt to open your garage door if the spring is broken. A quick explanation of doors and springs will help explain why.

    Your door is equipped with two kinds of springs:

    • Extension springs on either side of the door, along the rails, help counterbalance the weight of the door as it is raised or lowered.
    • Torsion springs across the top of the door help do the heavy lifting.

    Garage doors are generally made from wood or metal they can weigh in the area of 500 pounds. If one or more of those springs is broken, you will be lifting that weight all on your own.

    For safety reasons alone, it is better to call a reliable garage door spring repair service such as ours. Contact Overhead Garage Door, Inc. at for garage door repair in northern Illinois.

    Read Also: Garage Door Repair Wilmington Nc

    Clamp The Door To The Track

    Clamp a locking pliers or a C-clamp to the track just above one of the rollers. This will prevent the door from shooting up and breaking your nose when you wind the new springs during an overhead garage door repair. Also yank the cord and unplug the garage door opener before you start any garage door spring repair.

    Do I Need To Replace Both Garage Door Springs

    Your garage doors are probably going up and down multiple times a day. Torsion springs are necessary to allow the up and down movement of the garage door. When a spring breaks the door needs to be opened manually. Most garage doors are very heavy, making it difficult, oftentimes impossible for most people to open on their own. This situation can be frustrating, especially if vehicles are stuck inside. Single garage doors usually have one spring and double doors have two springs. When we get calls to repair broken springs we often get asked the question, Do I need to replace both garage door springs? Here is some advice to help you answer that question.

    What the spring is made of and how it was treated when manufactured does not determine the springs life expectancy. For example, some companies want to charge more for oil dipped, galvanized or powder coated springs. They will try to convince you that one will last longer than the other. We have found that isnt true.The important components to a springs lifespan are: 1. wire size 2. diameter 3. length

    When we are asked Do I need to replace both garage door springs? we usually leave it up to the customer. We at Anderson Garage Doors will advise you and answer any questions you have. You rely on our garage doors each day, therefore, it is crucial for your torsion springs to be installed properly. Dont get stuck. Call Anderson Garage doors for all your spring repair needs: 752-6677.

    Read Also: Chamberlain Garage Door Opener Adjustment

    Wayne Dalton Garage Door Spring Cost

    A Wayne Dalton Torquemaster torsion spring costs $50 to $180 for just the spring or between $200 and $350 for a complete replacement. Compatible extension or torsion springs for other types of Wayne Dalton doors cost $20 to $60 each.

    Wayne Dalton Garage Door Spring Cost


    The benefits of Torquemaster springs are:

    • Springs are enclosed inside a steel tube
    • Have numbered dials on the side of the mounting that allows technicians to see the current amount of tension on the springs. Technicians can safely relieve tension on the coils down to ‘0’ before replacing
    • Built-in safety feature to lock the door in the raised position when the springs break to prevent the door from falling on you.
    • Only compatible with Wayne Dalton garage door systems

    The Door Is Out Of Alignment

    How To Open A Broken Garage Door, Broken Spring

    If your door is out of alignment, it may not close properly, or you may be left with a gap at the bottom when the door is in the closed position. Well confirm if the spring is broken and causing your door to go off track. If it is, well provide you with an estimate for the repair work before proceeding. Once we have your permission to complete the repairs, well replace the spring and realign the door.

    Read Also: Craftsman Garage Door Opener 1/2 Hp

    Torsion Springs Vs Extension Springs

    The first step in terms of getting your garage door springs repaired or replaced is knowing what kind of spring system you have. There are two main spring systems: Torsion Springs and Extension Springs. Precision’s professionally trained technicians are fully equipped to work on torsion and extension spring systems.

    Torsion Springs

    Torsion springs are located above the opening of your door with springs that slide onto a bar.

    Extension Springs

    Extension spring systems can be found alongside the opening of the door.

    Repairing An Extension Spring

    Unlike a torsion spring, an extension spring is easier to replace.

    To give you an overview, you can remove and replace the springs without dealing with too much tension.

    Once you open the overhead door, the spring will lose tension. Hence, it is safe to replace it.

    But before you do it, secure the door with clamps to prevent it from falling.

    Then, you can disconnect the springs from the pulley, cable, and bracket.

    Install the new spring as needed, and attach it to the safety cable and pulley.

    For a more detailed procedure, watch this video on how to repair a broken garage door spring.

    This video is beneficial for those who want to fix the extension spring by themselves.

    Recommended Reading: Apartments With Attached Garages Fort Worth

    Why Do Garage Doors Break

    The three most common reasons for garage doors breaking are wear and tear, rust, and not maintaining them properly. Rusted spring parts can lead to the coils degrading faster than they should. In addition, not following a maintenance schedule or getting regular tune-ups can lead to quicker wear and tear of your doors.

    How Much Does It Cost To Replace A Garage Door Spring

    Garage Door Springs

    Garage door spring replacement costs between $150 and $400 on average. There are several factors that can affect the cost of garage door spring replacement, including the door size, type, number of springs, number of doors, and location. Our garage door technicians can answer any questions you have about garage door spring replacement cost contact us today.

    Don’t Miss: 164th Street Garage Yankee Stadium

    How Do I Know If I Have A Broken Garage Door Spring

    Home | Blog Posts | How Do I Know If I Have a Broken Garage Door Spring?

    If youre like most people, your garage door gets more use than your front door. Its the primary entry and exit point of your home, which means your garage door is going up and down several times a day, an action you typically take for granted as you push a button on your way in or out.

    Then, one morning, your garage door doesnt open. Suddenly, its not as simple as pushing a button and backing your car out. Now, you have a problem, and you need to find a solution.

    While there could be several reasons for a malfunctioning garage door, one of the most likely explanations is that your door has a broken torsion spring.

    Whats that, you ask? And what am I supposed to do about it?

    Dont worry. Most homeowners dont know much about the mechanics of their garage door, and thats OK. In fact, in 2014, the U.S. Consumer Products Safety Commission reported an estimated 18,000 garage door-related injuries. To avoid being included in this statistic, its better to leave garage door repair to professional repair companies, which means homeowners dont need to be experts about their garage door.

    The Importance Of Garage Door Springs

    Without springs, garage door openers are practically useless. Garage doors weigh hundreds of pounds and the springs are responsible for lifting them.

    As extension springs expand and as torsion springs twist, they support the doors weight by providing a reliable counterbalance. This mechanism controls how the door opens and closes. Without the springs, the opener wouldnt have the power it needs to lift the door.

    Read Also: Garage Door Repair Buford Ga

    Is It Okay To Open Your Garage Door With A Broken Spring

    The garage door is normally installed with torsion springs that are mounted on top of the garage door. The spring is intended to act as a counterbalancing part of the door system. The spring counterbalances the weight of the door by winding and unwinding each time someone opens and closes the garage door. Torsion springs come in various lengths, diameters, gauges, and finish. This spring plays a vital role in both opening and closing the garage door. The opener is not meant to lift the door. On a properly balanced door, the opener will need to simply move the door while the springs carry the weight. You never want a broken spring thats put into operation.

    When the garage door spring breaks one will be in a dilemma on whether to open the door or not? The garage door may be using a one spring system or a two spring system. Even though some garage doors have more than two springs in the operation system.

    Related Posts