16 By 7 Garage Door

Share This Post

Cost Of A Garage Door Opener For A 167 Door

Ideal 16×7 R12.9 insulated garage door install from Menards

If you are replacing a garage door, there may be no need for an opener. But if its a new installation, you will need one and the cost is about $450 for the opener and it includes installation. Garage door openers are mandatory. It entails the mechanism, electric motor, and track the garage door follows when it closes or opens. Advanced garage door openers feature smartphone or keypad user controls. You can check the best Chamberlain B1381 here.

There are three main types of garage door openers to choose from

  • Screw Drive it doesnt require a lot of maintenance but its a bit noisy.
  • Belt drive Ideal for attached garages, these types of openers use a more advanced chain and are very quiet.
  • Chain Drive They are noisier than all the above but are quite pocket-friendly. This is the most common type you will find in many homes.
  • Compare Chamberlain vs Liftmaster on this page to see which one works best for you.

    When Building A New Garage What Size Opening Is Needed For A 167 Garage Door

    When constructing a new garage the opening for a 16×7 garage door the opening should measure 16×7.

    The 16×7 opening should be after the header and all the trim work is installed. It is important to note

    that for a 16 foot wide garage door the header should be at minimum 9 inches longer than the door

    width, meaning your header should be 16 feet 9 inches long. The extra length for the header is to

    provide enough load bearing strength to cover the 16 foot opening span.

    The width of the opening prior to jambs being installed should be 16 feet 3 inches to allow for 2×6 jambs

    to be installed making the total width of the opening with the jambs installed 16 feet.

    The jambs and header provide solid surfaces for the installation of the garage door tracks, spring system

    and automatic garage door opener. It is important to also allow for proper head clearance in the garage

    as well. For standard installation there must be a minimum of 12 inches of clearance from the top of the

    garage door opening to the garage ceiling. This clearance is needed for the installation of the spring

    system and the automatic garage door opener. There are installation kits available for lower head

    clearances, but they have additional costs for the parts and installation.

    What Cycle Of Torsion Springs Should I Buy

    Torsion springs are the type of spring most often used in garage doors. The standard rating is 10,000 cycles, but they are available in higher cycle models. The right spring for you will depend on how often you use your garage door.

    Lets say you open and close your garage door 4 times per day. Multiply this number by 250 days.

    250 x 4 = 1000

    Next, multiply the product by 10 years the average lifespan of a garage door.

    1000 x 10 = 10,000

    The final number is the cycle of a torsion spring you need. In this example, you would be fine with the standard 10,000 torsion spring.

    Also Check: Garage Door Seal Bottom Lowes

    Hour Emergency Repair Service

    We are here to help you along the way, when unexpected things happen on a weekend, a holdiay, or after nornmal business hours. Please contact our 24 hour emegrency dispatch team or our toll free and your call will be answered by our friendly after hours answering service. They know just the right questions to ask. They will take down all of your particular needs and contact our after hours crew and they will promptly return your call and take care of your issue with effecient, high quality workmanship. Anchor Doors & Service Staff keeps a full line of most common replacment parts on our truck saving you time and money. We service Windsor & Essex County and the surrounding communities. Our Chatham location also offers emergency service. If you are calling from Chatham-Kent area our local phone number is 519-352-9699, or you may still reach us via our toll free .

    We accept Visa, Mastercard, Cash, Cheque, Debit and if required E-Transfers can be arranged.

    What Type Of Garage Door Opener Should I Buy

    WDMA &  ESWDA 16×7 5 Panel Frosted Glass Garage Door With Pedestrian ...

    Three common types of garage door openers are Belt Drive, Chain Drive, and Jackshaft Drive. Chain Drive garage door openers are strong and reliable, but they can be noisy.

    Jackshaft garage door openers are also sometimes called wall-mount garage door openers. These are not recommended for all garages but are great for some with certain conditions. They work for garage doors with low headroom, garages with large windows above the door, and garages with cathedral ceilings.

    OGD recommends Belt Drive Garage Door openers because they are strong, reliable, quiet, and require less maintenance.

    Don’t Miss: Hanging Bikes In The Garage

    The Duration It Takes To Install A 16 X 7 Garage Door

    Depending on the garage door sizes and materials used, the installation can take up to four hours. If you hire an installer with assistants, the project can even take as little as two hours. Complex and custom garage doors can take up to a day. The installation team will always give you a heads-up on how long the process will take.

    A Breakdown of Garage Door Installation Cost

    Earlier, we mentioned that the average fee for garage door installation is about $650. We then mentioned that a standard garage door costs $200 and the opener is $150. Where does the rest of the money go to?

    Because the installation of garage doors is a complex process, you will need to hire a team to help you out. This team will charge an installation fee and include prices for a new door and opener. Installation fees usually cost $250 for a single size door and $350 or more for a double size door. There are also other factors that affect the overall garage door installation costs, and these include the level of experience of the installation crew and materials used.

    How To Measure For Your Garage Door Installation

    1. Measure for Your 16×7 Garage Door Opening

    Measure the width of the entryway opening and the hight in feet and inches. This decides the size of entryway required. The unpleasant opening ought to be a similar size as the entryway.

    2. Measure your Side Room

    Measure for side room : 3-3/4 is needed on each side for establishment of the upward track for standard expansion spring, standard twist spring and EZ-SET Torsion Spring System, 5-1/2 for EZ-SET Extension Spring System.

    3. 16×7 Garage Door Headroom

    Measure region marked headroom distance between the highest point of the entryway opening and the roof . 10 is needed for the standard augmentation spring or EZ-SET Extension Spring System. 12 is needed for standard twist spring and EZ-SET Torsion Spring System. On the off chance that you have limited headroom, exceptional equipment is accessible. Extra headroom is needed for establishment of a programmed carport entryway opener.

    NOTE: If entryway stature reaches out over the opening, the headroom estimation ought to be changed proportionately.

    4. Measure Your Backroom Space

    Measure region marked private cabin distance is estimated from the carport entryway opening toward the back mass of the carport. Entryway stature in addition to 18 is requried. Extra back room might be needed for establishment of a programmed carport entryway opener.

    You May Like: Garage Door Weather Seal Replacement

    A Guide To Hiring A 16×7 Garage Door Installer

    Though its not hard to find a garage door installer, its not every technician who is skilled, knowledgeable, experienced, and friendly. These four traits are crucial in ensuring your new garage door functions correctly and safely. To help you find the right garage door installer. here is a guide on how to look for one.

  • The first step is going online and searching for the best garage door installers near you. Google will give you a long list. Look through the list, while looking at each installers website. Always pay keen attention to ratings and reviews.
  • If you find a couple of potential garage door installers, ask about their prices. Inquire for a price breakdown. This will give you an overview of what you are going to pay for.
  • Ask for credentials. If indeed they are a reputable company, they should be approved to offer these services in your city.
  • Ensure that you put it all on paper and dont sign without reading the entire document. In that agreement, the installer should list the price, materials used, and when they expect to finish the project.
  • Finally, choose the installer that stands out from the rest. By now, you should have at least four price estimates from reputable installers. Compare the prices and hire the one you are most drawn to. It is very important that you compare prices as this ensures you dont get overcharged.
  • Diy Vs Professional Installation

    How to remove a 16 x 7 ft garage door alone

    When it comes to installing a new garage door, hire a professional. Warranties are worthwhile with garage doors, especially newer, higher-tech ones. Garage doors are opened and closed using a load-bearing metal spring system, meaning that the entire weight of the door is transferred onto the springs.

    If these springs break, the kinetic energy stored within will be abruptly releaseda dangerous scenario. Luckily, labor costs to install a new garage door are fairly reasonable, with a $300 national average.

    Compare Quotes From Top-rated Garage Builders

    Free, No-commitment Estimates

    Read Also: Garage Door Opener For Sale

    Why Hire A Technician To Install My Garage Door

    Thanks to the internet, any project can easily be turned into a DIY. In this case, however, you should evaluate your options carefully. Of course, installing a garage door by yourself saves you hundreds of dollars. But, how good are you in garage door installation?

    There are many advantages of hiring a home improvement technician to install your garage door. The first thing they will do is to dismantle your old garage and dispose of it. Can your car fit into a garage door? And even if it does, where would you take your old garage door? When working with professionals, you dont have to worry about that.

    A skilled garage door installer will have the tools and knowledge of how to install a garage door correctly. These doors can be quite complicated, especially if you arent familiar with the mechanisms of how they work. Hiring an expert goes a long way towards ensuring your garage door is installed and functions correctly. Hiring a company like ours ensures you get useful input, advice, and recommendations on matters related to materials and style.

    Some Things To Consider Before Buying New Garage Doors

    Are you buying a new garage door for an existing garage or are you building a new garage? If youre looking for a garage door replacement, your goal is to determine the exact size of door you need. This is where precise garage measuring will come into play which we will discuss later.

    In particular, you must know the amount of space you have in your garage for the lifts. Lifts are the tracks installed in your garage that allow the door to open. Your goals for your garage and the amount of space you have will determine which type of lifts to buy.

    On the other hand, if you are building a new garage, you need to think about what function you need the garage to serve. How many vehicles do you plan to park in the garage? How big are they? What is the architectural style of your home?

    A certain garage size does not mean you have to have a certain garage door size. Two garages of different sizes can have the same size doors. Two same-size garages can have different door sizes.

    All of these are factors that play a part in your purchase of new garage doors and determining what size is best for your garage.

    Also Check: How Much New Garage Door

    Type Of Garage Door Opener

    Most garage doors are automatically operated with a manual backup. Garage door openers can last up to 15 years, so they rarely need replacing. Keypads, remotes and smart technology are considered part of the system, but the options you have access to will depend on the opener that you choose. Openers can be installed for around $350, on average.

    How To Measure A Torsion Spring


    To properly size a garage door torsion spring, you will need to take several measurements. These springs come in a variety of sizes and have different spring rates that dictate how much weight they can lift. To size your spring, you will need to measure the width and height of your garage door as well as the inside diameter of your torsion tube. You will also need to know the wind of your spring which is either right hand wound or left hand wound . With these measurements, you can then select a torsion spring with the proper specs for your garage door.

    Recommended Reading: Garage Door Won’t Close Light Flashing

    My Garage Door Is Noisy What Does This Mean Should I Be Worried

    There are a number of reasons a garage door could be noisy, but the most common cause is the rubbing of old spring coils against one another. This is not necessarily a cause for concern, but if you want to get rid of the noise you can apply a spray-on lubricant or motor oil from the top to the bottom of each spring.

    How To Choose The Right Size Torsion Spring

    There are two ways to determine what size torsion spring you need: -Method one: Using a tape measure, measure the diameter of the spring. -Method two: Use the weight of the door to determine the size of the spring.

    The most important thing to keep in mind when choosing a torsion spring is that it must be strong enough to support the weight of your garage door. If it is not, your door could come crashing down, causing serious injury or damage to your property.

    Don’t Miss: Garage Door Opener Remote Programming

    Garage Door Opener Brands


    Since the late 1950s, Genie has been a trusted garage door opener brand. Alliance Manufacturing Company began in 1923 and created Genie in 1954.

    Genie was founded in 1958 and created the first direct-drive screw opener.

    These openers use Overhead Doors Safe-T-Beam® self-diagnostic system. This safety system uses an invisible infrared beam to reverse the door if something passes through it.

    GenieSenseTM monitors and diagnoses door issues. This system stops the door if it changes, adding safety. Genie openers lift in 9-12 seconds on average.

    The Intellicode® system prevents unauthorized garage door access and signal piracy. Compatible with HomeLink® and Car2U®.

    The company also sells side-mount openers for garages with low headroom and space restrictions, keypads, and remotes.

    Motion-detecting lights, frequency scanning to ensure the door opens even with interference, wi-fi monitoring and operation, and ultra-quiet performance are standard on most Genie openers.

    Aladdin Connect® monitors and reports on garage door movement using your router. This feature doesnt require a smart-home system.

    Genies product selector helps people choose the right garage door for them, whether professionally installed or DIY.

    Chamberlain Garage Door Opener

    Chamberlain, LiftMaster, and Craftsman are Chamberlain Group brands. The Group owns Merlin garage door openers and Grifco commercial openers.

    Wi-Fi® Ultra-Quiet

    LiftMaster Opener for 16×7 garage doors

    X 10 Clopay Gallery Model Gd2lu Long Panel With Grooves Walnut Garage Door With Insul Clear Arch 1 With Grilles

    #GarageDoorRepairLasVegas How to Properly Frame an Opening for a 16X7 Garage Door
    • 2″ Thick, R-18 Intellicore Insulation
    • Seconds – As-Is, Small perforated pinhole paint line missing paint down the face
    • Standard hardware 12″ or 15″ Radius Tracks
    • nail on weather seals
    • Can be sold as a 16 x 8 Door with or without glass
    • Sold As-Is, Not exactly as seen on display

    Contact us today for a free no-obligation estimate.

    Recommended Reading: Garage Door Repair Lexington Sc

    Is It Cheaper To Buy A Garage Door Or Garage Door Opener From The Big Box Stores

    Absolutely not. Big box stores rely on a network of contractors to install overhead doors. When considering your total cost, you must add the cost of the garage door and installation. Now consider that in order to claim a warranty issue, you might need to bring your garage door or opener back to the store! More cost effective garage door with installation you can get from a dealer like DODDS and a service level is far superior.

    Garage Door Opener For 167

    A garage door opener provides easy, lit access to your home and improves security. These devices are more convenient with smart-device compatibility and home-automation system connectivity. Summary

    Protection Opener types

    Garage door openers are generally similar. A motor powers a railcar or trolley. As the trolley moves, it opens or closes the garage door. The motors trolley movement differentiates garage door opener models.

    Read Also: Quick Turn Garage Door Brackets

    Roller Shutter Garage Doors

    Similar to sectional garage doors, this type of door doesnt swing out so it provides maximum width and height. Another benefit of this door is that it uses a motorized mechanism, rather than lifts, allowing more room on the sides of the garage. This makes it a great choice for RV garage doors or other large vehicles that need a tight squeeze.

    Side Hinged Garage Door

    Your Homes Three Colors


    Each home ought to incorporate three tones: a field shading that fills in as the essential tone, a trim tone for regions like overhangs and door jambs and a highlight tone for entryways and screens. Do you need your carport entryway tone to coordinate with your field or trim tone? It will rely upon the position of the garage door in your home and what shading needs balance.

    Pair light field tones with more obscure trim tones and the other way around. Go ahead and be innovative with highlight tones as a general rule, however an emphasize shading utilized on a carport entryway will ordinarily overpower the equilibrium.

    Read Also: Metal Garage Storage Cabinets Harbor Freight

    Related Posts